Well, another one followed me home

[oldrifleman]

Originally Posted by BadOscar

Nice group of guns you got there. See if the top of the ejector has rub marks on it. I had a couple of mine lock up for that reason, it seems to get worse as the gun warms up and begins to get a little dirty. A few passes with a stone on the top of the ejector usually clears it up if it is rubbing.

Just to be sure, also check that the roll pin is installed that holds the ejector in.

Thanks I will check those areas, I pretty sure the Pin is in, but the Ejector height is an interesting issue as it started after a few about 25-30 fast shots right off the bat. n

[GoldenVolt]

Congrats n on your new Heritage.

Sorry you experienced some problems. Please let us know what you find.

Greg

[oldrifleman]

Thanks, I am not worried at all especially since after the hiccup I put 130 or o through with a glitch. These thing happen, especially with new machinery. n

[Sheepdog]

Very Nice! I think you have a handle on the problem. The stainless on stainless guns need to be run wet with a heavy viscosity oil. I had mine well lubed with Rem Oil and was not heavy enough to hold up. I use FP-10 and Mobil One.