|
|
| Register | Forums | Blogs | Today's Posts | Search | Donate |
 |
 |
 |
|
#2
01-30-2012, 05:05 PM
|
|||||
|
|||||
Nice group of guns you got there. See if the top of the ejector has rub marks on it. I had a couple of mine lock up for that reason, it seems to get worse as the gun warms up and begins to get a little dirty. A few passes with a stone on the top of the ejector usually clears it up if it is rubbing.
Just to be sure, also check that the roll pin is installed that holds the ejector in. Last edited by BadOscar; 01-30-2012 at 05:09 PM. 
|
Threaded Mode