|
|
| Register | Forums | Blogs | Today's Posts | Search | Donate |
 |
 |
 |
|
|
|
#1
02-09-2017, 03:13 PM
|
|||||
|
|||||
Congrats to the World of 1911s use torque head screwdriver to remove grip screws................
__________________
CBOB:0002 1905 Savage 380, 1978, 1980 DW Pistol Pacs, Severns Custom 1985 Springer 1911A1, 09 DW Marksman, S&W Model 19-6, GSG 1911 22LR. , S&W Model 29-2 
|
|
#2
02-11-2017, 02:35 PM
|
|||||
|
|||||
|
Ok fellas, I was able to get rid of the idiot scratch and other minor scratches, so I want to share some of my very interesting findings about how to deal with scratches on a "brushed" SS finish. In particular the use of steel wool that at first was suggested by some friends and gun people.
After many youtube videos and extensive search, I learned that steel wool (0000) is not a good choice. The reason for this has to do with the following: As you work the steel wool on the slide (or frame) to get rid of scratches, fine particles of the steel wool may deposit in the cracks of the stainless steel slide/frame. These steel wool particles are not stainless and will promote rust spots on the cracks where it gets in. Either stick to 1000 grit sandpaper or do like I did, turn to 3M Scotch Brite pads. They are synthetic and will never leave any residues on the metal. It worked great. I used the grey pad at first which is comparable to 800-1000 grit, then finished it with the white pad which is 1200-1500 grit. SCRATCHES ARE GONE. I followed the grain of the metal in a single directon (not back and forth), did it by hand, and went slow. Now I can shoot the gun and as long as I don't drop it or bang it against something, I should be able to maintain its beautiful brushed look. Below is chart that describes 3M Scotch Brite pads grits.
__________________
Pedro U / Member# 0770 
Last edited by pitor; 02-11-2017 at 02:54 PM.
|
|
#3
02-11-2017, 04:15 PM
|
|||||
|
|||||
^^ Good news indeed.
__________________
Rich COTEP #762 A gun is a tool, no better or no worse than any other tool: an axe, a shovel or anything. A gun is as good or as bad as the man using it. Remember that. And shepherds we shall be, for Thee, my Lord, for Thee. Power hath descended forth from Thy hand, that our feet may swiftly carry out Thy command. So we shall flow a river forth to Thee, and teeming with souls shall it ever be. In nomine Patris, et Filii, et Spiritus Sancti.
|
Hybrid Mode