![]() |
|
Register | Forums | Blogs | Today's Posts | Search | Donate |
![]() |
![]() |
![]() |
#1
|
|||||
|
|||||
![]()
Just did this and it worked very well . It is not the screw to take up the trigger play that keeps your trigger set to fire .
I have about 4 lb. pull now . I had already polished out the trigger and shear prior to doing this . http://www.sargenthome.com/15_Minute_AR_Trigger_Job.htm
__________________
ARLEY CBOBO759 RIA 1911 .45 - 2 FM 9s M90 & M95- DPMS AR 15 Lower with PSA Upper SS 16 " - Rossi " Gallery " Remi 34 - Cimarron " El Malo 357 SA & assorted others - Leather worker - "Sorcerer Leather Works - Knife maker "B.A.D. BLADES Desperta Ferro |
#2
|
||||
|
||||
![]()
Good refresher for the newbies.
First did this over 10 years ago. Now I just use the JP springs.
__________________
COTEP CBOB0297 |
#3
|
|||||
|
|||||
![]()
I used JP on my other AR but at $20.00n I thought I would give this a try . Saved a couple of bucks . That's always good for my Wife .
__________________
ARLEY CBOBO759 RIA 1911 .45 - 2 FM 9s M90 & M95- DPMS AR 15 Lower with PSA Upper SS 16 " - Rossi " Gallery " Remi 34 - Cimarron " El Malo 357 SA & assorted others - Leather worker - "Sorcerer Leather Works - Knife maker "B.A.D. BLADES Desperta Ferro |
#4
|
|||||
|
|||||
![]()
Good DIY, thanks for posting.
__________________
**I have been Enlightened** |