|
|
| Register | Forums | Blogs | Today's Posts | Search | Donate |
 |
 |
 |
|
#1
07-03-2016, 08:32 PM
|
|||||
|
|||||
Lyman Dillon dies ?
Will Lyman rifle dies .223 work in a Dillon 550 ?
Found a 2 piece set for $32.00 . Then I will need to get what to finish dies ? I always just bought Dillon sets but now I am not rich , Cal . conversion will also be ordered . Thanks, Arley
__________________
ARLEY CBOBO759 RIA 1911 .45 - 2 FM 9s M90 & M95- DPMS AR 15 Lower with PSA Upper SS 16 " - Rossi " Gallery " Remi 34 - Cimarron " El Malo 357 SA & assorted others - Leather worker - "Sorcerer Leather Works - Knife maker "B.A.D. BLADES Desperta Ferro 
|
|
#2
07-03-2016, 08:52 PM
|
||||
|
||||
|
While I haven't used Lyman, I do use RCBS, Lee, Redding, and Dillon with my 550. I see no reason to believe the Lyman would be any different. Actually, I haven't "used" the Redding dies yet, but they're in the shell plate waiting for use. I am curious to see if they work better than my RCBS dies.
The two die set, in addition to caliber conversion kit and powder die, are all that is required. A separate crimp die can be used in the 4th station if you want.
__________________
COTEP #CBOB0353 Happiness is a warm, dirty gun. Last edited by Grizzman; 07-03-2016 at 11:35 PM.
|
|
#4
07-03-2016, 10:27 PM
|
|||||
|
|||||
|
I purchased a set of Lyman 38 Super Dies for around $36. It proved the old adage.... "you get what you pay for." I have had continued problems with the seating/crimping die. Lyman's response is " buy a separate crimping die".
RCBS doesn't need to do this. In fact... I took my RCBS 9mm seating/crimping die and used it for the 38 Super (yes, you can do this safely, according to RCBS) No problem whatsoever. I won't purchase any more Lyman dies. RCBS, Redding and Hornady. In that order. Just my opinion. RCBS and Redding are equal in quality, but Redding asks for more money. Da 
__________________
COTEP: CBOB578 DW CCO SIG GSR 1911 SA Micro Compact and a spectacular cast of others! "You have never lived, until you have almost died. And for those who fight for it, life has a flavor that the protected will never know." Guy de Maupassant, 1893. Anonymously, penned on a sign at a command post at Khe Sanh, RVN.
|
|
#5
07-04-2016, 12:25 AM
|
||||
|
||||
|
Yes.
I use several different die sets in my RL 550B, and none were made by Dillon.
__________________
"Sights are for the unenlightened." Rick IDPA/NRA Certified Safety Officer/Range S.O.
|
|
#6
07-04-2016, 12:36 AM
|
|||||
|
|||||
|
I had lee a rcbs dies to start with both were good. Rcbs probably a bit better but when i got a dillon i got dillon dies because they are super easy to adjust and use. But are a bit more expensive too.
Never tried hornaday myself but don't hear bad about them either. I don't think you will go wrong if you buy good quality off the bat. I figured you don't replace them very often so go what you think is best quality right out the gate. If I didn't buy dillon i would buy rcbs.
__________________
|
|
#7
07-04-2016, 03:22 PM
|
|||||
|
|||||
|
As long as the die treads are 7/8th x 14 they will work in any press.
__________________
There are no dangerous weapons; there are only dangerous men. To speak without thinking is to shoot without aiming.
|
|
#8
07-16-2016, 11:19 PM
|
||||
|
||||
|
Quote:
__________________
NRA Benefactor Member NRA Golden Eagle USCG Veteran
|
Linear Mode
