|
|
| Register | Forums | Blogs | Today's Posts | Search | Donate |
 |
 |
 |
|
#1
05-03-2011, 10:29 AM
|
|||||
|
|||||
Share your 10mm loads here please
One that I use is
180gr XTP and Golddots 10.5gr of Bluedot WLP primer OAL- 1.25" this has been a good round for my G20 i have a few lead i would like to try out. just curious if anyone has loaded with them and what they found to be good loads. this is what i have. 180gr flat point from missouri cast bullets 170gr swc idp #2 from missouri bullet company
__________________
CBOB0405 ︻┳═一 “When you get to the end of your rope, tie a knot and hold on. Help is on the way.” Author Unknown 
|
|
#2
05-03-2011, 11:39 AM
|
|||||
|
|||||
|
__________________
CBOB0405 ︻┳═一 “When you get to the end of your rope, tie a knot and hold on. Help is on the way.” Author Unknown
|
|
#3
05-03-2011, 12:44 PM
|
|||
|
|||
|
Havent done any lead, but a nice light target load would be 6.7gr of Universal Clays under a 155gr Copper plated FP. I like it alot.
Bill
|
|
#4
05-03-2011, 11:16 PM
|
|||||
|
|||||
|
Bass, I thought the .40 S&W was the light target load
 I haven't started reloads for my 10mm yet but I plan on working up to "hot and heavy". That's the whole idea, right?  , where are you finding the Gold dots?
__________________
COTEP CBOB390 Government name- Terry
|
|
#5
05-03-2011, 11:51 PM
|
|||||
|
|||||
|
Quote:
 they are hard to find.
__________________
CBOB0405 ︻┳═一 “When you get to the end of your rope, tie a knot and hold on. Help is on the way.” Author Unknown
|
|
#6
05-06-2011, 12:07 PM
|
|||
|
|||
|
Quote:
Yeah, I like the hot loads, but for just range plinking, I still love shooting the 10mm. So I always like to have a light load for it. Somebody said something about the 10mm that I thought was perfect for it. "The 10mm is like an old mucle car, pure horsepower..." Bill
|
|
#7
07-30-2011, 09:06 PM
|
|||
|
|||
|
Anyone have other loads ? I have PowerPistol, 2400, WSF.. probably not ideal, but PP makes a good flash. I have the .40/10mm load book. maybe once I set my loading stuff back up I'll try some out.
Whats the useful life of 10mm brass on Mid-Heavy loads ?
|
|
#8
07-30-2011, 11:09 PM
|
|||||
|
|||||
|
Power Pistol
9.5gr PP 9.7gr PP 10.5gr PP 135gr Nosler HP all three loads worked great in my Razorback. 9.5gr is min and 10.6gr is max per my load manual for Power Pistol and 135gr hollow points.
__________________
CBOB0405 ︻┳═一 “When you get to the end of your rope, tie a knot and hold on. Help is on the way.” Author Unknown
|
|
#9
07-30-2011, 11:14 PM
|
|||||
|
|||||
|
I just got some PP too for my 10mm. My newest Lyman book says max load for a 180gr JFP is 7.8. I loaded a few at 7.4 and plan on hitting the range tomorrow to try them out. First time shooting my CBOB.
Sent by Brown's Custom Grips using Tapatalk!
__________________
Brown's Custom Grips Exotic wood pistol grips for 1911 frames. Find US On Facebook! Class 07 FFL and Dan Wesson Dealer
|
|
#10
07-31-2011, 10:08 AM
|
|||
|
|||
|
Try Starline brass: 8.3 grains of VV N350 under a 165 grain remington golden sabre. It gives about 1250 fps out of my CBOB and about 1310 out of my G20 with the comped KKM barrel. These velocities are verified over a chronograph. They show no signs of pressure in my two firearms but your mileage may vary. Be carefull etc. On a side note this load produces almost no flash whatsoever. That was verified by night firing. Hope this helps
|
Linear Mode
