|
|
| Register | Forums | Blogs | Today's Posts | Search | Donate |
 |
 |
 |
|
#12
11-13-2019, 09:46 AM
|
||||
|
||||
Quote:
__________________
"Sights are for the unenlightened." Rick IDPA/NRA Certified Safety Officer/Range S.O. 
|
|
#13
11-13-2019, 09:47 AM
|
|||||
|
|||||
|
Tapatalk drives me crazy. But I'll admit it is easy to post pictures.
__________________
Jim CBOB0497 "That rifle hanging on the wall of the working class flat or laborer's cottage is the symbol of democracy. It is our job to see that it stays there." - George Orwell
|
|
#14
11-13-2019, 02:31 PM
|
|||||
|
|||||
|
Quote:
Totally agree. If it weren’t for the ease of pic posting, I wouldn’t use it. Sent from my iPhone using Tapatalk
__________________
**I have been Enlightened**
|
|
#15
11-13-2019, 04:42 PM
|
||||
|
||||
|
This PM I took the Tribal over to my bench, removed the slide assembly, then pulled the stocks, MSH, TS, and the sear spring. (It’s also a good idea to remove the slide stop/thumb safety plungers and spring when the TS is removed, so they don’t wind up lost.)
I didn’t feel like a further detail strip was warranted, based on how things looked and moved freely. So, I just replaced the stock sear spring with a Cylinder & Slide light pull sear spring, wiped that damn grease off all the parts I’d removed, then lubed and reassembled everything. The trigger pull went from 5 1/2 pounds with the stock sear spring to 4 1/4 pounds with the C&S spring. All told, that was 20 minutes well spent!
__________________
"Sights are for the unenlightened." Rick IDPA/NRA Certified Safety Officer/Range S.O.
|
Linear Mode
