Springs for Checkmate Mags

[Riverpigusmc]

Look at Wilson Combats website and buy the 7.95 kit, spring with follower..same one they use in the ETM's. All my wilsons are over 5 years old and function without a hiccup. Just bought that kit to replace one in a Shooting Star

[sdmc530]

Originally Posted by Riverpigusmc

Look at Wilson Combats website and buy the 7.95 kit, spring with follower..same one they use in the ETM's. All my wilsons are over 5 years old and function without a hiccup. Just bought that kit to replace one in a Shooting Star

This is a good option or you can also check out Wolff springs too, use them and have had really good results.

[milkmanjoe]

You can also go to Tripp Cobra(Tripp Research) for internals. These are my preference. No logic or anything bad to say about others, just been mostly with Tripp for years.

http://www.trippresearch.com/store/store_1911.html

[DrHenley]

Originally Posted by milkmanjoe

You can also go to Tripp Cobra(Tripp Research) for internals. These are my preference. No logic or anything bad to say about others, just been mostly with Tripp for years.

http://www.trippresearch.com/store/store_1911.html

I looked, but when I got here I didn't know what to do.

.042
MS-12C042
MS-13C042
MS-14C042
MS-15C042
MS-17C042

.048
MS-14C048
MS-17C048

[Jdl2]

Originally Posted by Riverpigusmc

Look at Wilson Combats website and buy the 7.95 kit, spring with follower..same one they use in the ETM's. All my wilsons are over 5 years old and function without a hiccup. Just bought that kit to replace one in a Shooting Star

I'm with Mike on this one. I recently suggested to Keith Lawton that they issue WC ETMs with new pistols rather than the Checkmates.
Jim

[Shark1007]

I agree with the folks above, but you might call Checkmate Industries. I just spoke with Roger who handles sale to LEO and ret'd military and he was extremely generous with the cost on 10 new mags and threw in base pads.