|
|
| Register | Forums | Blogs | Search | Today's Posts | Mark Forums Read | Donate |
 |
 |
 |
|
|
|
#1
02-21-2013, 04:59 PM
|
|||||
|
|||||
I used an RCBS Rock Chucker for many years, still have it. I then went to a Dillon RL550B. I check every 10th round just for my own piece of mind. Mistakes can happen, might be a bit anal but I have never had a bad round.
The main thing about reloading at least for me is to be in a distraction free environment and to concentrate ONLY on reloading!!! NO TV OR RADIO!!!! I believe that if a person is careful and concentrates on what he/she is doing then any machine can be suitable as long as you are careful and observant to what is going on.
__________________
"This is the 44 Magnum AutoMag and holds a 300 grain cartridge and if properly used can remove the fingerprints"!! COTEP # CBOB0152 Last edited by Dave Waits; 02-21-2013 at 05:02 PM. 
|
|
#2
02-21-2013, 05:06 PM
|
|||||
|
|||||
|
Quote:
Look, you guys are my Friends. I just don't want anything to happen to you all.
__________________
Diligentia, Vis, Celeritas COTEP#CBOB0428 NRA,GCA,OGCA, USAF,Msgt.(Ret.)
|
|
#3
02-21-2013, 06:00 PM
|
|||||
|
|||||
|
Right, I have not had a bad round as yet!!!
I actually phrased that wrong though Dave. What I meant to say is that I load 10 rounds and then check them all for weight and length. I know where you are coming from though Dave. It only takes 1 bad round to ruin your day!!! 
__________________
"This is the 44 Magnum AutoMag and holds a 300 grain cartridge and if properly used can remove the fingerprints"!! COTEP # CBOB0152
|
|
#4
02-21-2013, 06:39 PM
|
||||
|
||||
|
Thanks all for the discussion. Not interested in a progressive press for many reasons, all mentioned above. Looking for input from those that own or know about the Lyman; thanks Mark and Dave. Perhaps for nearly half the price, the Lee classic is a good way to go too. I want something that will do both pistol and rifle, not break the bank, and last. I appreciate all the comments/ discussion and happy to read more here and elsewhere. Thanks again.
__________________
Those who hammer their guns into plows will plow for those that don't. T. Jefferson CBOB0712
|
|
#5
02-21-2013, 08:26 PM
|
|||||
|
|||||
|
US45... told ya... reloaders ALL have opinions, and most of us know our equipment and what we're talking about. I'd agree with Dave, don't over buy, a decent single stage or a turret is good. I don't know when Dave last used a Lee Classic turret, but I also have never used a Lyman turret... so I'd say we're on equal ground there....but if he said the quality on the Lee Classic is somehow sub standard, I would have to disagree with him. Fit and finish is fine, and the completed round is correct. I do not use the progressive function on the Lee turret, as I said earlier... I load in batch mode only. Why? because again... I agree with Dave. I can watch every single load and be sure I don't under or over charge.
I also use a Dillon or Wilson gauge to check every completed round. Anal? Probably. But I've never had a FTE/FTF because of a bad round. So.... Just my 2 cents. Which someone will probably add 23 more to in order to make a quarter! Da 
__________________
COTEP: CBOB578 DW CCO SIG GSR 1911 SA Micro Compact and a spectacular cast of others! "You have never lived, until you have almost died. And for those who fight for it, life has a flavor that the protected will never know." Guy de Maupassant, 1893. Anonymously, penned on a sign at a command post at Khe Sanh, RVN.
|
|
#6
02-21-2013, 09:03 PM
|
|||||
|
|||||
|
I have never used a Lyman.
__________________
canis fidelis cave canem, vereor non magnus nocens lupus In hoc signo vinces If you can list them, you ain't got enough!!! Life Member NRA, SCI, ATA, NSCA COTEP 414
|
 |
| Thread Tools | |
| Display Modes | |
Hybrid Mode