COTEP.org  

Go Back   COTEP.org > Main Category > The Dremel Room

Reply
 
Thread Tools Display Modes
  #1  
Old 11-02-2021, 10:00 AM
FfNJGTFO's Avatar
FfNJGTFO FfNJGTFO is offline
COTEP Member
 
Join Date: May 2016
Location: Wesley Chapel, FL
Posts: 1,663
Thanks: 1,522
Thanked 207 Times in 72 Posts
Default

Quote:
Originally Posted by Caleb View Post
That’s a good start.


Sent from my iPhone using Tapatalk

What's your recommendation on removing the old bolt catch roll pin? I'll probably start with some penetrating oil and light taps. I just have to be real careful I don't damage the lower.
Reply With Quote
  #2  
Old 11-05-2021, 09:28 PM
Caleb's Avatar
Caleb Caleb is offline
COTEP Member
 
Join Date: Sep 2013
Location: Earth
Posts: 11,471
Thanks: 4,198
Thanked 1,137 Times in 254 Posts
Default

Quote:
Originally Posted by FfNJGTFO View Post
What's your recommendation on removing the old bolt catch roll pin? I'll probably start with some penetrating oil and light taps. I just have to be real careful I don't damage the lower.

Tape up the lower anywhere the punch or hammer may come in contact with. Use the proper sized punch and lightly tap it out from the muzzle towards the Butt end. Take your time and use oil. Should come out somewhat easily.


Sent from my iPhone using Tapatalk
__________________
**I have been Enlightened**
Reply With Quote
Reply

Thread Tools
Display Modes



All times are GMT -4. The time now is 01:34 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.