|
|
| Register | Forums | Blogs | Search | Today's Posts | Mark Forums Read | Donate |
 |
 |
 |
|
|
|
#1
10-03-2016, 07:55 AM
|
||||
|
||||
Try Kleenbore Gun Care Lead Away Gun Cloth or equivalent (Birchwood Casey, Midway brand, etc). Works great on cleaning stains on my stainless revolver cylinders.
__________________
COTEP CBOB0297 
|
|
#2
10-03-2016, 08:29 AM
|
|||||
|
|||||
|
Nickle is a tough one to remove. Strong ammonia bore solvent - something like Butch's Bore Shine or Sweet's 7.62 - might loosen it up. Any mechanical method of removal will likely put a shine on the finish.
__________________
Jim CBOB0497 "That rifle hanging on the wall of the working class flat or laborer's cottage is the symbol of democracy. It is our job to see that it stays there." - George Orwell
|
|
#3
10-03-2016, 09:12 AM
|
|||||
|
|||||
|
0000 steel wool wrapped around a toothpick and worked over the spots would probably do it and not polish the rest of the surrounding area.
Crocus cloth (jewelers rouge) might work too.
__________________
There are no dangerous weapons; there are only dangerous men. To speak without thinking is to shoot without aiming.
|
|
#4
10-03-2016, 09:30 AM
|
|||||
|
|||||
|
I used 'Kroil' to remove some light brass kisses from my DW CCO although it has the duty black finish, it worked great!! .... it's worth a try on your stainless.
http://www.kanolabs.com/
__________________
Rich COTEP #762 A gun is a tool, no better or no worse than any other tool: an axe, a shovel or anything. A gun is as good or as bad as the man using it. Remember that. And shepherds we shall be, for Thee, my Lord, for Thee. Power hath descended forth from Thy hand, that our feet may swiftly carry out Thy command. So we shall flow a river forth to Thee, and teeming with souls shall it ever be. In nomine Patris, et Filii, et Spiritus Sancti.
|
 |
| Thread Tools | |
| Display Modes | |
Hybrid Mode