COTEP.org  

Go Back   COTEP.org > Main Category > The Dremel Room

Reply
 
Thread Tools Display Modes
  #1  
Old 10-03-2016, 03:06 AM
NAMVET72's Avatar
NAMVET72 NAMVET72 is offline
Founding Member
Super Moderator
 
Join Date: Apr 2011
Location: Pa
Posts: 5,864
Thanks: 1,399
Thanked 1,478 Times in 295 Posts
Default

Try Flitz metal polish and small cotton ball < Good Luck. I don't use nickel plated brass in auto pistols are rifles for that reason,


__________________
CBOB:0002
1905 Savage 380, 1978, 1980 DW Pistol Pacs, Severns Custom 1985 Springer 1911A1, 09 DW Marksman, S&W Model 19-6, GSG 1911 22LR. , S&W Model 29-2
Reply With Quote
  #2  
Old 10-03-2016, 05:01 AM
DaFadda's Avatar
DaFadda DaFadda is offline
Founding Member
Super Moderator
 
Join Date: Dec 2011
Location: Nashville Tennessee
Posts: 3,360
Thanks: 665
Thanked 611 Times in 169 Posts
Default

Here are the Scotchbrite pad ratings. You might try a white (1200-1500 grit) or a blue (1000) grit. Very carefully so as not to damage the sandblasting.

3M Scotch Brite Nylon Pads:
7445 - White pad, called Light Duty Cleansing - (1000) 1200-1500 grit
7448 - Light Grey, called Ultra Fine Hand - (600-800) 800 grit.
6448 - Green (?), called Light Duty Hand Pad - (600) 600 grit
7447 - Maroon pad, called General Purpose Hand - (320-400) 320 grit
6444 - Brown pad, called Extra Duty Hand - (280-320) 240 grit
7446 - Dark Grey pad, called Blending Pad (180-220) 150 grit
7440 - Tan pad, called Heavy Duty Hand Pad - (120-150) 60(?)
Green Scotch Brite is available EVERYWHERE. It's 600 grit.
Blue Scotch-Brite is considered to be about 1000 grit.
(The value inside the parentheses is directly from 3M.)
3M Chart

BUT.... If it was my gun, I would start even simpler. Consider trying a Mr. Clean white "Magic Eraser" and some plain water. I'll bet you have one under the kitchen sink already. It is so gentle, that I don't think it would do any damage to the finish. All said, I don't know the finish, so whatever you choose to do, do cautiously.
__________________
COTEP: CBOB578
DW CCO
SIG GSR 1911
SA Micro Compact
and a spectacular cast of others!

"You have never lived, until you have almost died. And for those who fight for it, life has a flavor that the protected will never know." Guy de Maupassant, 1893.
Anonymously, penned on a sign at a command post at Khe Sanh, RVN.
Reply With Quote
  #3  
Old 10-03-2016, 07:55 AM
wxl wxl is offline
Founding Member
COTEP Member
 
Join Date: Apr 2011
Location: South Texas
Posts: 393
Thanks: 4
Thanked 87 Times in 13 Posts
Default

Try Kleenbore Gun Care Lead Away Gun Cloth or equivalent (Birchwood Casey, Midway brand, etc). Works great on cleaning stains on my stainless revolver cylinders.
__________________
COTEP CBOB0297
Reply With Quote
  #4  
Old 10-03-2016, 08:29 AM
DrHenley's Avatar
DrHenley DrHenley is offline
Founding Member
COTEP Member
 
Join Date: Jun 2011
Location: Columbus, GA
Posts: 3,654
Thanks: 68
Thanked 818 Times in 219 Posts
Default

Nickle is a tough one to remove. Strong ammonia bore solvent - something like Butch's Bore Shine or Sweet's 7.62 - might loosen it up. Any mechanical method of removal will likely put a shine on the finish.

__________________
Jim
CBOB0497

"That rifle hanging on the wall of the working class flat or laborer's cottage is the symbol of democracy. It is our job to see that it stays there."
- George Orwell
Reply With Quote
  #5  
Old 10-03-2016, 09:12 AM
AFJuvat's Avatar
AFJuvat AFJuvat is offline
COTEP Member
 
Join Date: May 2016
Location: Jacksonville, FL
Posts: 1,278
Thanks: 120
Thanked 283 Times in 63 Posts
Default

0000 steel wool wrapped around a toothpick and worked over the spots would probably do it and not polish the rest of the surrounding area.

Crocus cloth (jewelers rouge) might work too.
__________________
There are no dangerous weapons; there are only dangerous men.

To speak without thinking is to shoot without aiming.
Reply With Quote
  #6  
Old 10-03-2016, 09:30 AM
RKP's Avatar
RKP RKP is offline
COTEP Member
 
Join Date: Sep 2014
Location: Gods country USA
Posts: 5,797
Thanks: 1,901
Thanked 781 Times in 255 Posts
Default

I used 'Kroil' to remove some light brass kisses from my DW CCO although it has the duty black finish, it worked great!! .... it's worth a try on your stainless.

http://www.kanolabs.com/
__________________
Rich
COTEP #762

A gun is a tool, no better or no worse than any other tool: an axe, a shovel or anything. A gun is as good or as bad as the man using it. Remember that.

And shepherds we shall be, for Thee, my Lord, for Thee.
Power hath descended forth from Thy hand, that our feet may swiftly carry out Thy command.
So we shall flow a river forth to Thee, and teeming with souls shall it ever be.
In nomine Patris, et Filii, et Spiritus Sancti.
Reply With Quote
Reply

Thread Tools
Display Modes



All times are GMT -4. The time now is 07:39 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.