![]() |
|
Register | Forums | Blogs | Search | Today's Posts | Mark Forums Read | Donate |
![]() |
![]() |
![]() |
|
#1
|
|||||
|
|||||
![]() ![]() What the Apex trigger gives you is a new sear, springs for the trigger (1 will give you a 5# trigger, one for 4# pull and if you leave the factor trigger spring in you can go 3#'s or less (around 28#'s) you also get a forward set sear and you ca get a kit with a Flat face Trigger ( I use them and they are great). They have very little to no over travel pr under travel. you can then add a competition striker spring kit and adjust the striker hit ( I use Federal Primers in my loads). The last thing to do is add a full length SS Guide rod (4.25") and a 13# ( or so) ISMI recoil spring. And then test,test test ![]()
__________________
NRA-LIFE,COTEP, USPSA,STEEL CHALLENGE,SASS,GSSF, ICORE GLOCK Certified Armorer |
![]() |
Thread Tools | |
Display Modes | |