|
|
| Register | Forums | Blogs | Search | Today's Posts | Mark Forums Read | Donate |
 |
 |
 |
|
#1
03-26-2015, 03:41 PM
|
|||||
|
|||||
grips from start to finish.
I was recently asked if I had any pictures showing a set of blanks turning into grips, I just so happen to have some so I thought i'd post them up.
the blanks are English Walnut.  the holes are drilled.  grips are fit to the frame and the plunger tube cut is made.    the grips are rough shaped.  then they are sanded to a finer grit.  they are sanded to the shape I want.  grips are then hand sanded to 220 grit, the covered plunger tube area is shaped, and the magazine release notch is cut.  the ambi safety cut is made.  and the MSH pin relief Cut.  the grips are then sanded to 320 grit and the grip screw shelf's are cut.  the grips are finish sanded and the first coat of finish is applied.  and finally the finished grips.   
__________________
Criminals thrive on the indulgence of society's understanding. I have no such indulgence nor understanding of criminals. Neither does my .45. 
|
| The Following 13 Users Say Thank You to Lonestar grips. For This Useful Post: | ||
AutoMag (03-26-2015), Caleb (03-26-2015), douglas_knott (03-26-2015), Gatorade (03-26-2015), herefordman1 (03-27-2015), jmlutz (03-26-2015), LittleGator (03-26-2015), NAMVET72 (03-26-2015), pony up (03-26-2015), Rick McC. (03-26-2015), sdmc530 (03-26-2015), Snipersnest (04-02-2015), Xbonz (03-26-2015) | ||
|
#3
03-26-2015, 04:30 PM
|
|||||
|
|||||
|
heck I thougth it was hard to make grips
 nothing to it! Awesome  really a lot of time and care goes into each set.
__________________
|
|
#4
03-26-2015, 04:53 PM
|
|||||
|
|||||
|
Thanks for sharing that
!!
__________________
"This is the 44 Magnum AutoMag and holds a 300 grain cartridge and if properly used can remove the fingerprints"!! COTEP # CBOB0152
|
|
#5
03-26-2015, 05:00 PM
|
|||||
|
|||||
|
That Texas boy is a craftsman!! Thanks,
.
__________________
COTEP #719 "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." - Thomas Jefferson quoting Cesare Beccaria
|
|
#7
03-26-2015, 05:07 PM
|
|||||
|
|||||
|
The Magician reveals his secrets.
|
|
#8
03-26-2015, 05:39 PM
|
|||||
|
|||||
|
Very cool and more proof that knowledge isn't talent. Give me
's materials, tools and step by step instructions ... I'll come back with something suitable for kindling 
__________________
COTEP 730
|
|
#9
03-26-2015, 06:06 PM
|
|||||
|
|||||
|
Thanks for showing that! The sanding the curve is pure artistry. I dont have the skills to make that curve. Mine would be all out of round and flat spots and high spots and holes off from where they are supposed to be.
Thanks once again for showing the steps. As soon as I get a keeper 1911 I will have to get an order in!
__________________
CBOB0746 NRA Life Member Florida CWL Since 1992
|
|
#10
03-26-2015, 06:26 PM
|
|||||
|
|||||
|
Very impressive work
. The unlikely, to me, looking blanks made a very impressive set of grips. dennis
__________________
Dennis COTEP CBOB0761 Semper Fi - Old Corp Rubber Boat Jockey NRA Life Member  I stand for the flag, I kneel for the fallen! The sooner you fall behind, the more time you'll have to catch up. 
|
 |
| Thread Tools | |
| Display Modes | |
Linear Mode
