1000 or BUST!

[Caleb]

Scope mounting time!

First things first, you have to degrease the mounting areas and screw threads to remove any grease or oil . This will ensure the loctite will hold properly.

Then you mount the 20 moa rail and tighten the screws to the recommended torque.... these required 20lbs.

Next step is to make sure your rifle is level.

Once you are sure you are level..... install the rings and lightly tighten them.

I like to mark the upper and lower rings that came together to assure that they will tighten properly and what not.


Sent from my iPhone using Tapatalk