AR15 Trigger ?

Arley · #1 09-10-2014, 05:48 PM

Well I replaced the trigger / hammer springs to 5 lbs . Still has a lot of grit , I did polish a bit but was afraid to go very far or deep . Seems like a crummy set up IMHO anyway . Very sharp edges on the sear and hammer . Any suggestions welcome other than going to a "smith " I am not able to throw $200. at a Timmy system . I'm on a tight budget .
I know not to do much here due to bad things happening .

Thanks in advance

Caleb · #2 09-10-2014, 06:02 PM

Sometimes rough finish on the pins or pin holes will cause thr gritty feel. Polish those areas up and see if it helps.

Arley · #3 09-10-2014, 06:13 PM

Dang , had not thought of that . Thanks

Caleb · #4 09-10-2014, 06:29 PM

Don't forget the flats of the trigger where they contact the lower reciever.

jmlutz · #5 09-10-2014, 07:32 PM

Get a JPRifles trigger and hammer set, you will not believe the difference. It is expensive, but worth every penny.
http://www.google.com/url?sa=t&rct=j...75097201,d.b2U

Pawpaw · #6 09-11-2014, 02:45 AM

The ALG Advanced Combat Trigger seems to get good reviews and is only $65.

titanse05 · #7 09-13-2014, 05:58 PM

Quote:

Originally Posted by Pawpaw

The ALG Advanced Combat Trigger seems to get good reviews and is only $65.

This is the answer that you are looking for since you are limiting yourself on budget. However, if you wise up and save up to buy the best triggers that are available at Geissele you will not regret it. Both of my ARs have Geissele SSA and it is a true joy to pull the trigger. Plus Bill is a great friend to the industry so you just can't go wrong.

Sent from my Samsung Galaxy S4

MPDC · #8 09-13-2014, 06:02 PM

Quote:

Originally Posted by titanse05

this is the answer that you are looking for since you are limiting yourself on budget. However, if you wise up and save up to buy the best triggers that are available at geissele you will not regret it. Both of my ars have geissele ssa and it is a true joy to pull the trigger. Plus bill is a great friend to the industry so you just can't go wrong.

Sent from my samsung galaxy s4

this.

Caleb · #9 09-18-2014, 08:54 AM

I have never been a trigger snob but, I have not tried a timney or Giselle trigger.. I do knoe that the Spikes milspec with a $10 spring upgrade breaks at 4.5lbs with a nice two stage feel. A little light polishing on the contact areas helps a ton.