COTEP.org
Page 5 of 6 « First 34 5 6
Show 40 post(s) from this thread on one page

COTEP.org (https://www.cotep.org/forum/index.php)
-   Reloading Bench (https://www.cotep.org/forum/forumdisplay.php?f=26)
-   -   Researching the LNL and 650 (https://www.cotep.org/forum/showthread.php?t=14539)

DaFadda 03-12-2017 10:17 AM
In my original post, I said I go through this LNL vs. Big Blue once a year or so... This, from 2016

http://www.cotep.org/forum/showthrea...ighlight=squib

The thread includes a very good commentary by Phil and others. I'm still not convinced that an extra $1000 is worth either the LNL or the Dillons. Phil, next time I come through SD, I'll buy dinner, and you can show me your reloading setup. That may change my mind!

But I promise, you'll enjoy the read.

DaFadda

sdmc530 03-12-2017 01:43 PM
Quote:
Originally Posted by DaFadda (Post 147627)
In my original post, I said I go through this LNL vs. Big Blue once a year or so... This, from 2016

http://www.cotep.org/forum/showthrea...ighlight=squib

The thread includes a very good commentary by Phil and others. I'm still not convinced that an extra $1000 is worth either the LNL or the Dillons. Phil, next time I come through SD, I'll buy dinner, and you can show me your reloading setup. That may change my mind!

But I promise, you'll enjoy the read.

DaFadda
Deal buddy!!

Actually all this reloading talk has me missing making boolits so I may run some 45 tomorrow and gopro the process.

pitor 03-12-2017 07:01 PM
Quote:
Originally Posted by sdmc530 (Post 147642)
Deal buddy!!

Actually all this reloading talk has me missing making boolits so I may run some 45 tomorrow and gopro the process.
Yes please do so, upload and post link, Pleeeease?

sdmc530 03-12-2017 07:07 PM
Quote:
Originally Posted by pitor (Post 147658)
Yes please do so, upload and post link, Pleeeease?
Will see how my week goes:

I have to get a new chain ring on my bicycle, hit the gym, and I am classroom helper this week for Kaden's Kindergarten class. Lisa is at Mayo Clinic with her brother so I will see what I can do.

NAMVET72 03-12-2017 09:41 PM
Yes Phil we know you have Big Bucks,

Unless you have lots of brass and money just get a single stage to start with, get two or three reloading manuals, read and read again. Then take it slow, do one at a time, measure every single load.....Good luck
Clyde

Gatorade 03-12-2017 11:33 PM
I am still getting unpacked from vacation but one point I will make is that i have too much OCD to deprime and then load. I have seen some nasty junk in primer pockets and just jamming another primer in there before the pocket gets cleaned doesn't seem like a good practice. So I run the brass through the cleaner, deprive and resize. Then run it through the polish media. Then I can either bag it and pick up later or hand prime and flare. Charging and seating are pretty easy steps after that.

Rick McC. 03-12-2017 11:47 PM
Quote:
Originally Posted by DaFadda (Post 147624)
As I have said, everyone has their preference and is passionate about what they use. And RickMc is surely correct in that you will like the 550. I would too. But I'll still stand by my contention that someone who has never reloaded before is better served by using a single stage or turret press to learn on, especially if they are learning the process on their own. In his last line, Rick mentions that he uses his Rockchucker for swaging. I'm not a betting man, but if I were... the Rockchucker was probably his first press.

Time doesn't mean much to me any longer. Being retired is good.

DaFadda
Actually, my first few "presses" were the Lee $9.99 kits, where you supplied your own wood block and hammer. I had a few back in the early '70's.

That Rockchucker was quite a step up!

That said, I used it for only a few months before I bought the Dillon.

DaFadda 06-12-2017 12:32 PM
Quote:
Originally Posted by pitor (Post 147512)
Thank you guys, and thank you Padre for trying to steer me into a cost-saving direction . But I know that I'll want efficiency over control of the process. Understanding reloading is not as complicated nowadays. You can watch a couple of YouTube videos and have a pretty good idea of everything involved and the steps. I want to be able to spend an hour reloading and have all my reloads done for the month. So a progressive reloading system is what I need. Hence I'll be saving my money and waiting for when the time is right for a Dillon Progressive. Is Dillon the only brand that makes Progressive reloading presses?
No, Hornady, Lee, and RCBS also make progressive presses. Attached is a very well written article that outlines the pros and cons of Hornady, Lee and Dillon. Might help in your final selection.

http://www.comrace.ca/cmfiles/dillon...Comparison.pdf

pitor 06-12-2017 01:57 PM
Quote:
Originally Posted by DaFadda (Post 152148)
No, Hornady, Lee, and RCBS also make progressive presses. Attached is a very well written article that outlines the pros and cons of Hornady, Lee and Dillon. Might help in your final selection.

http://www.comrace.ca/cmfiles/dillon...Comparison.pdf
Padre, I'm dead set on a Lee turret press. It fits my reloading needs perfectly.

TLE2 06-12-2017 02:40 PM
My only 1 cent is that unless you shoot A LOT! (5-10,000?) rounds a month, it doesn't make sense (to me). You are relying on your attention for detail.

I tried it, froze, and never finished one round, sold the whole lot.

I have an Ammo Can full of commercial ammo. I'm fine. :)


All times are GMT -4. The time now is 05:12 PM.
Page 5 of 6 « First 34 5 6
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.