CPM T440V - CPM T420V
Two steels that hold an edge superbly (better than ATS-34), but it's difficult to get the edge there in the first place. These steels are both high in vanadium. Spyderco offers at least one model in CPM T440V. Custom maker Sean McWilliams is a big fan of 440V, which he forges. Depending on heat treatment, expect to have to work a bit harder to sharpen these steels -- also, don't expect ATS-34 type toughness. 420V is CPM's follow-on to 440V, and with less chromium and almost double the vanadium, is more wear-resistant and may be tougher than 440V.
400 Series Stainless
Before Cold Steel switched to AUS-8, many of their stainless products were marketed as being of "400 Series Stainless". Other knife companies are beginning to use the same term. What exactly *is* 400 Series Stainless? I always imagined it was 440-A, but there's nothing to keep a company from using any 4xx steel, like 420 or 425M, and calling it 400 Series Stainless.
NON-STEELS USED BY KNIFEMAKERS
Cobalt - Stellite 6K
A flexible material with very good wear resistance, it is practically corrosion resistant. Stellite 6K, sometimes seen in knives, is a cobalt alloy. David Boye uses cobalt for his dive knives.
Titanium
Newer titanium alloys can be hardened near 50 Rc, and at that hardness seem to take something approaching a useful edge. It is extremely rust-resistant, and is non-magnetic. Popular as expensive dive knives these days, because the SEALs use it as their knife when working around magnetic-detonated mines. Mission knives uses titanium. Tygrys makes a knife with a steel edge sandwiched by titanium.
Ceramics
Numerous knives have been offered with ceramic blades. Usually, those blades are very very brittle, and cannot be sharpened by the user; however, they hold an edge well. Boker and Kyocera make knives from this type of ceramic. Kevin McClung recently came out with a ceramic composite knife blade that much tougher than the previous ceramics, tough enough to actually be useful as a knife blade for most jobs. It is also user-sharpenable, and holds an edge incredibly well.
|